Nice Toona 4 TO4006 Swing Gate Motor Kit in Oman
Nice Toona 4 (TO4006) linear swing gate motor kit for two leaves up to 4 m and 1000 kg each, with 3200 N of thrust and a photo test before every movement. The kit includes two motors, the Nice MC800 control unit, two ON2E remotes, an OXI receiver, EPM photocells, a flashing light and two brackets.
OMR 296.000, in stock in Muscat, with fitting across Oman.
Description
The Nice Toona 4 (model Nice TO4006) is a linear swing gate motor from Nice for gate leaves up to 4 m wide and 1000 kg, with a thrust of 3200 N. We sell it as a double swing gate kit: two motors, the Nice MC800 control unit, two ON2E remotes, an OXI receiver, a pair of EPM photocells, a flashing light and two mounting brackets.
It suits large villa gates and compound entrances in Oman, where heavy steel leaves need a strong, steady push.
What is in the Nice Toona 4 double swing gate kit?
| In the kit | What it does |
|---|---|
| Two Nice TO4006 gearmotors | One linear arm for each leaf, irreversible so the gate stays locked |
| Nice MC800 control unit | Runs both motors, the safety devices and automatic closing |
| Two Nice ON2E remote controls | Open and close the gate from the car |
| Nice OXI receiver | Plugs into the control unit and receives the remotes |
| One pair of Nice EPM photocells | Stop the gate closing on a car or a person |
| Flashing light | Warns that the gate is moving |
| Two brackets | Fix each motor to the pillar and to the leaf |
Everything for a two leaf gate is in one box. A key selector, a push button or extra photocells can be added on request.
Nice Toona 4 price in Oman
Price: OMR 296.000 for the complete double swing gate kit, in stock at our shop in Al Khuwair, Muscat. Installation is quoted after we see the gate.
Nice TO4006 technical data
| Data | Value |
|---|---|
| Type | Linear electromechanical operator, Nice Toona series |
| Maximum leaf width | 4 m |
| Maximum leaf weight | 1000 kg |
| Thrust | 3200 N |
| Gearing | Worm gear with an increased ratio for smooth movement |
| Internal parts | Steel, light alloys and technopolymers |
| Control unit | Nice MC800 |
| Safety | Photo test before every movement |
| Manual release | Metal key |
These figures come from the supplier listing. We confirm the supply voltage and speed from the motor label at handover.
Why a linear swing gate motor?
A linear swing gate motor pushes the leaf with a screw driven arm fixed between the pillar and the gate. It is the most common type for villa gates in Oman because it fits most pillars and is easy to service.
| Linear arm, like the Toona 4 | What it means for you |
|---|---|
| Fixed on the surface of the pillar | No digging under the gate, quicker installation |
| Strong push of 3200 N | Moves heavy steel leaves without strain |
| Irreversible worm gear | Holds the gate shut against wind and pushing |
| Reinforced rear mount | Stays firm on the pillar under heavy load |
For a pillar too thin for a linear swing gate motor, or a gate that opens outward onto a road, we look at an articulated arm or an underground motor instead.
Is a 4 m leaf right for the Nice Toona 4?
| Your gate | Our advice |
|---|---|
| Leaves up to 3 m on a villa gate | The Toona 4 gives a large margin, and runs gently |
| Leaves from 3 to 4 m, or heavy solid steel | The Toona 4 is the right size |
| Leaves up to 5 m | Choose the Nice Toona 5 |
| Light leaves up to about 2.5 m | The Nice Wingo 4 kit can be enough |
| Very large leaves | See the Nice Toona 7 |
Wind matters too. A wide, solid leaf acts like a sail in a shamal, so on exposed sites we choose a motor with spare force. See all our Nice swing gate motors.
The Nice MC800 control unit and photo test
The Nice MC800 control unit runs both leaves of the double swing gate kit, with a delay between them so they close in the right order and overlap correctly. It handles automatic closing after a pause, the flashing light, the photocells and the OXI receiver.
Its photo test checks that every safety device works before each movement. If a photocell is dirty, blocked or damaged, the Nice MC800 control unit will not move the gate, so a fault never goes unnoticed. In Oman, where sand settles on photocell lenses, that check is a real safety benefit.
Built for the Oman heat, sand and salt
| Problem | What helps |
|---|---|
| Summer sun on the motor body | A housing with increased resistance to weather |
| Sand on the arm and photocells | Clean the arm and lenses at every service; the photo test flags a blocked photocell |
| Salt air in Sohar, Sur, Salalah and Duqm | Service coastal sites more often and grease the arm |
| Power cuts | The metal key release lets you open each leaf by hand |
How we install the Nice TO4006
- We check the hinges first: each leaf must swing freely by hand before any motor goes on.
- We measure the pillar and set the bracket positions so the linear arm gets the right opening angle.
- We fix both motors with the brackets, and fit end stops so the leaves stop in the right place.
- We fit the EPM photocells across the gateway, the flashing light, and the Nice MC800 in a weatherproof position.
- We pair both ON2E remotes, set the force, the leaf delay and the pause time, and test the photocells while the gate closes.
Nice Toona 4 specification
| Model | Nice Toona 4, TO4006 |
|---|---|
| Sold as | Double swing gate kit: 2 motors, MC800 control unit, 2 ON2E remotes, OXI receiver, EPM photocells, flashing light, 2 brackets |
| Leaf size | Up to 4 m and 1000 kg |
| Thrust | 3200 N |
| Type | Linear swing gate motor, irreversible worm gear |
| Manual release | Metal key |
| Price | OMR 296.000 |
Supply and fitting across Oman
We are a physical shop in Al Khuwair, Muscat with our own engineers. They supply, fit and service Nice gate automation across all eleven governorates: Muscat, Al Batinah North, Al Batinah South, Ad Dakhiliyah, Ash Sharqiyah North, Ash Sharqiyah South, Adh Dhahirah, Al Buraimi, Al Wusta, Dhofar and Musandam. That reaches Sohar in Al Batinah North, Nizwa in Ad Dakhiliyah, Sur in Ash Sharqiyah South, Salalah in Dhofar and Duqm in Al Wusta.
Visit us at Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman. Call or WhatsApp +968 78109286, or email contact@doorsauto.com. Send us the leaf width, the gate weight and a photo of the pillars, and we confirm the right motor before you pay.
Nice Toona 4 FAQ
What is the Nice Toona 4?
The Nice TO4006: a linear swing gate motor for leaves up to 4 m and 1000 kg, with 3200 N of thrust, sold as a kit for a two leaf gate.
What is in the Nice Toona 4 kit?
Two motors, the Nice MC800 control unit, two ON2E remotes, an OXI receiver, a pair of EPM photocells, a flashing light and two brackets.
What does the photo test do?
It checks every safety device before each movement. If a photocell fails or is blocked, the gate does not move.
Should I choose the Toona 4 or the Toona 5?
The Toona 4 suits leaves up to 4 m. For leaves up to 5 m, choose the Nice Toona 5.
What is the Nice Toona 4 price in Oman?
OMR 296.000 for the complete double swing gate kit, in stock at our Muscat shop. Installation is quoted after we see the gate.
Nice Toona 4 Swing Gate Automation:
Specifications:
- Type: Swing Gate Motor
- Compatibility: Suitable for various swing gate styles
- Efficiency: Optimized for energy-saving operation
- Safety Features: Includes obstacle detection and auto-reverse
- Installation: User-friendly, straightforward setup
- Durability: Constructed for long-term, weather-resistant use









