Nice Toona 5 TO5016 Swing Gate Motor Kit for 5 m Gates in Oman
Nice Toona 5 (TO5016) 230V swing gate motor kit for two leaves up to 5 m: 340 W, 1800 N and 54 cycles an hour, IP44. The kit includes two motors, the Nice MC800 control unit, two FLO2RE remotes, an OXI receiver, EPM photocells, a flashing light, a push button and two brackets.
OMR 296.000, in stock in Muscat, with fitting across Oman.
Description
The Nice Toona 5 (model Nice TO5016) is a 5 m swing gate motor from Nice: a 230V swing gate motor with 1800 N of force, rated for 54 cycles an hour, for a large swing gate at a villa, compound or commercial site. We sell it as a complete kit for a two leaf gate, with the Nice MC800 control unit, two FLO2RE remotes, an OXI receiver, a pair of EPM photocells, a flashing light, a push button and two brackets.
Made in Italy, with an aluminium housing and steel moving parts inside, it is built for wide leaves that a smaller motor cannot push.
What is in the Nice Toona 5 kit?
| In the kit | What it does |
|---|---|
| Two Nice TO5016 gearmotors | One linear arm for each leaf, up to 5 m |
| Nice MC800 control unit | Runs both motors, the safety devices and automatic closing |
| Two Nice FLO2RE remote controls | Open and close the gate from the car |
| Nice OXI receiver | Plugs into the control unit and receives the remotes |
| One pair of Nice EPM photocells | Stop the gate closing on a car or a person |
| Flashing light | Warns that the gate is moving |
| Push button | Opens the gate from inside |
| Two motor fixing brackets | Fix each motor to the pillar and to the leaf |
Everything for a large two leaf gate is in one box. A key selector, a keypad or a GSM opener can be added to the control unit later.
Nice Toona 5 price in Oman
Price: OMR 296.000 for the complete Nice Toona 5 kit, in stock at our shop in Al Khuwair, Muscat. That covers a full 5 m swing gate motor kit for both leaves. Installation is quoted after we see the gate.
Nice TO5016 technical data
| Data | Value |
|---|---|
| Maximum leaf length | 5 m |
| Supply | 230V AC, 50 Hz |
| Current | 1.5 A |
| Power | 340 W |
| Maximum force | 1800 N |
| Speed | About 0.013 m per second |
| Duty | 54 cycles per hour |
| Capacitor | Built in |
| Protection rating | IP44 |
| Working temperature | Minus 20 to plus 50°C |
| Dimensions | 965 x 115 x 105 mm |
| Weight | 7 kg per motor |
| Control unit | Nice MC800 |
These figures come from the supplier listing of the Nice data. A duty of 54 cycles an hour is high for a swing motor, so the Toona 5 copes with a busy compound gate as well as a villa.
Why a 5 m swing gate motor?
Most villa swing motors are rated for leaves of 2.5 to 4 m. A large swing gate with 5 m leaves needs a longer stroke and more leverage, or the motor strains at the start of every opening. The Toona 5 is a 5 m swing gate motor built for exactly that.
| Your gate | Our advice |
|---|---|
| Leaves up to 4 m | The Nice Toona 4 is enough |
| Leaves from 4 to 5 m | The Nice Toona 5 is the right size |
| A large swing gate that needs battery backup | Ask about the Nice Toona 5 TO5024, the 24V version |
| Very large or very heavy leaves | See the Nice Toona 7 |
Leaf length is only part of the choice. Gate weight, hinge condition, the opening angle and wind all matter, and a wide solid leaf acts like a sail in a shamal. We check all of these on site. See all our Nice swing gate motors.
A 230V swing gate motor: simple and strong
The Nice TO5016 is a 230V swing gate motor with its capacitor built in, so it connects straight to the MC800 with no extra parts. A 230V motor suits heavy leaves well: it delivers steady force through the whole stroke and needs no transformer.
| 230V Toona 5 (TO5016) | 24V Toona 5 (TO5024) |
|---|---|
| Steady force for heavy leaves | Soft start and stop with finer force control |
| Simple wiring, capacitor built in | Can run from a backup battery in a power cut |
| 54 cycles per hour | Suited to sites with frequent power cuts |
For most sites in Muscat with stable power, the 230V swing gate motor is the simpler choice. In a power cut, each leaf opens by hand with the release key.
Built for a large swing gate in Oman
| Feature | Why it matters here |
|---|---|
| Two aluminium shells, polyester painted | Stand up to sun and heat on an exposed pillar |
| Steel internal moving parts | Long life under the load of a wide leaf |
| Top access to the connections | Faster service, without removing the motor |
| IP44, minus 20 to plus 50°C | Rated for outdoor use through the summer |
At the coast in Sohar, Sur, Salalah and Duqm, salt air attacks any outdoor steel, so we service a large swing gate on the coast more often and grease the arms. Inland, sand on the arm and the photocell lenses is the main enemy, and we clean both at every visit.
The MC800 control unit and safety
The Nice MC800 runs both leaves with a delay between them, so they open and close in the right order and overlap correctly. It handles automatic closing, the flashing light, the push button and the OXI receiver. The EPM photocells stop and reverse the gate if a car or a person breaks the beam, and we test them before automatic closing is switched on.
On a large swing gate at a compound, the control unit also accepts access control: GSM openers, WiFi controllers, RFID readers, keypads and long range vehicle readers.
How we install the Nice TO5016
- We check the hinges first: a 5 m leaf must swing freely by hand before any motor goes on.
- We measure the pillar and set the bracket positions for the right opening angle and leverage.
- We fix both motors with the brackets, and fit end stops so the leaves stop in the right place.
- We fit the EPM photocells, the flashing light, the push button and the MC800 in a weatherproof position.
- We pair both FLO2RE remotes, set the force, the leaf delay and the pause time, and test the photocells while the gate closes.
Nice Toona 5 specification
| Model | Nice Toona 5, TO5016 |
|---|---|
| Type | 230V swing gate motor with a linear arm |
| Sold as | Kit: 2 motors, MC800 control unit, 2 FLO2RE remotes, OXI receiver, EPM photocells, flashing light, push button, 2 brackets |
| Leaf length | Up to 5 m |
| Supply and power | 230V AC, 340 W, 1.5 A |
| Force and speed | 1800 N, about 0.013 m/s |
| Duty | 54 cycles per hour |
| Protection and temperature | IP44, minus 20 to plus 50°C |
| Price | OMR 296.000 |
Supply and fitting across Oman
We are a physical shop in Al Khuwair, Muscat with our own engineers. They supply, fit and service Nice gate automation across all eleven governorates: Muscat, Al Batinah North, Al Batinah South, Ad Dakhiliyah, Ash Sharqiyah North, Ash Sharqiyah South, Adh Dhahirah, Al Buraimi, Al Wusta, Dhofar and Musandam. That reaches Sohar in Al Batinah North, Nizwa in Ad Dakhiliyah, Sur in Ash Sharqiyah South, Salalah in Dhofar and Duqm in Al Wusta.
Visit us at Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman. Call or WhatsApp +968 78109286, or email contact@doorsauto.com. Send us the leaf width, the gate weight and a photo of the pillars, and we confirm the right motor before you pay.
Nice Toona 5 FAQ
What is the Nice Toona 5?
The Nice TO5016: a 230V swing gate motor with a linear arm, for leaves up to 5 m, with 1800 N of force and 54 cycles an hour, sold as a kit for a two leaf gate.
What is in the Nice Toona 5 kit?
Two motors, the Nice MC800 control unit, two FLO2RE remotes, an OXI receiver, a pair of EPM photocells, a flashing light, a push button and two brackets.
What is the difference between the TO5016 and the TO5024?
The TO5016 is the 230V Toona 5. The TO5024 is the 24V version, with softer movement and a battery backup option.
Is the Toona 5 a 5 m swing gate motor?
Yes. It is rated for swing gate leaves up to 5 m. For leaves up to 4 m, the Nice Toona 4 is enough.
What is the Nice Toona 5 price in Oman?
OMR 296.000 for the complete kit, in stock at our Muscat shop. Installation is quoted after we see the gate.
- Type: Swing Gate Motor
- Compatibility: Various gate types
- Power Efficient and robust
- Features: Obstacle detection, auto-reverse
- Installation: User-friendly











