Nice OXIBD Bidirectional Receiver for Gates in Oman
Nice OXIBD bidirectional plug in receiver at 433.92 MHz for Nice control units with an OXI radio socket. Two way with Nice BD remotes for gate status feedback, and one way with the ON2E, FLO2RE and INTI ranges.
OMR 22.000, in stock in Muscat. Fitting and programming across Oman.
Description
The Nice OXIBD is the bidirectional receiver of the Nice OXI family: a plug in receiver at 433.92 MHz that slots into the radio socket of a Nice control unit. It receives the commands from your remotes and, with Nice BD remotes, sends gate status feedback back to the remote, so you can see whether the gate is open or closed without looking at it.
It also reads the standard Nice remotes, including the ON2E, FLO2RE and INTI ranges, so it can replace a faulty receiver or upgrade an older one.
Nice OXIBD price in Oman
Price: OMR 22.000 for one genuine Nice OXIBD receiver, in stock at our shop in Al Khuwair, Muscat. Fitting and programming your remotes are quoted when we see the control unit.
Nice OXIBD technical data
| Data | Value |
|---|---|
| Model | Nice OXIBD, OXI family |
| Type | Bidirectional receiver, plug in module |
| Frequency | 433.92 MHz |
| Communication | Two way with Nice BD remotes, one way with standard Nice remotes |
| Security | Nice rolling code |
| Installation | Plugs into the radio socket of a compatible Nice control unit |
| Range | About 50 to 100 m, depending on the site |
As a plug in receiver, the OXIBD takes its power from the control unit, so no separate supply or wiring is needed.
Gate status feedback with a bidirectional receiver
A normal receiver only listens. A bidirectional receiver also answers: when a Nice BD remote sends a command, the OXIBD replies with the result, and the remote shows it with its LED.
| One way receiver | Bidirectional receiver with BD remotes |
|---|---|
| You press and hope the gate moved | The remote confirms the command was received |
| You walk out to check the gate | Gate status feedback shows open or closed on the remote |
| No sign of a fault | A failed command shows at once on the remote |
Gate status feedback is useful when the gate is out of sight: at night, from inside the house, or at a compound gate around a corner.
Nice BD remotes and standard Nice remotes
| Remote | Communication |
|---|---|
| Nice BD remotes, such as Era One BD and MyGo BD | Two way, with gate status feedback |
| Nice ON2E | One way |
| Nice FLO2RE | One way |
| Nice INTI2 and the Inti range | One way |
That means you can fit the OXIBD now, keep your existing remotes, and move to Nice BD remotes later for feedback. See all our Nice remotes.
A plug in receiver: quick to fit
Most current Nice control units have a radio socket for an OXI plug in receiver. Fitting one is quick:
- We switch off the power to the control unit.
- We plug the OXIBD into the radio socket; no extra wiring is needed.
- We switch on, program each remote to the receiver, and test every button at the gate.
The OXIBD is supplied in some kits, such as the Nice TUB 4000, and is sold on its own as a replacement or upgrade.
When to replace or upgrade the receiver
| Situation | Why the OXIBD helps |
|---|---|
| Remotes stopped working on every remote at once | The receiver may have failed; a new plug in receiver fixes it |
| Lightning or a power surge damaged the board | Replace the receiver after checking the control unit |
| You want gate status feedback | Upgrade to the bidirectional receiver and add Nice BD remotes |
| You moved into a home with unknown remotes | Start fresh with a new receiver and new remotes |
Before we replace a receiver, we check the remote batteries and the control unit, because a flat battery or a board fault can look like a receiver problem.
Is the OXIBD compatible with my control unit?
The OXIBD fits Nice control units with an OXI radio socket, which covers most current Nice sliding gate motors, swing gate motors and garage door openers. Older boards may use a different receiver. Send us a photo of the control board or the motor label, and we confirm before you buy.
Supply and fitting across Oman
We are a physical shop in Al Khuwair, Muscat with our own engineers. They supply, fit and service Nice receivers, remotes and gate automation across all eleven governorates: Muscat, Al Batinah North, Al Batinah South, Ad Dakhiliyah, Ash Sharqiyah North, Ash Sharqiyah South, Adh Dhahirah, Al Buraimi, Al Wusta, Dhofar and Musandam. That reaches Sohar in Al Batinah North, Nizwa in Ad Dakhiliyah, Sur in Ash Sharqiyah South, Salalah in Dhofar and Duqm in Al Wusta.
Visit us at Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman. Call or WhatsApp +968 78109286, or email contact@doorsauto.com. Send us a photo of your control board, and we confirm the right receiver before you pay.
Nice OXIBD FAQ
What is the Nice OXIBD?
A Nice bidirectional receiver of the OXI family at 433.92 MHz, which plugs into the radio socket of a Nice control unit.
What does bidirectional mean?
With Nice BD remotes, the receiver answers each command, so the remote can show gate status feedback such as open or closed.
Will my ON2E, FLO2RE or INTI2 remotes work with it?
Yes. The OXIBD reads these standard Nice remotes one way, and Nice BD remotes two way.
Does the plug in receiver need extra wiring?
No. It plugs into the radio socket of a compatible Nice control unit and takes its power from the board.
What is the Nice OXIBD price in Oman?
OMR 22.000, in stock at our Muscat shop. Fitting and programming are quoted when we see the control unit.
NICE OXIBD Remote Receiver Specifications
- Brand: NICE
- Model: OXIBD Remote Receiver
- Product Type: Gate Remote Control
- Capacity: Standard residential and commercial installations
- Build: heavy duty internal gearing
- Application: apartment buildings and gated communities
- Availability: In stock in Oman, delivery nationwide









Reviews
There are no reviews yet.