Nice Toona 5 TO5024 24V Swing Gate Motor in Oman

SKU: NICE_TO5024_KIT
Genuine & Authorized Product
Official Dealer Authorized in Oman
Fast Delivery Across all of Oman
1 Year Warranty On installation
OMR 296.000
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: NICE_TO5024_KIT Categories: , Brand:

Nice TO5024 Toona 5 24V swing gate motor for leaves up to 5 m: magnetic encoder, 1800 N, up to 95 cycles an hour, on the Nice MC824H control unit with a backup battery option for power cuts.

OMR 296.000, in stock in Muscat, with fitting across Oman.

Description

The Nice TO5024 is the Toona 5 from Nice in its 24V version: a 24V swing gate motor for leaves up to 5 m, with a magnetic encoder, 1800 N of force and a work cycle of up to 95 cycles an hour. It runs on the Nice MC824H control unit, which reads the encoder and can take a backup battery, so it becomes a swing gate motor with battery backup for sites with power cuts.

It is the choice when a large swing gate needs smooth, precise movement and must keep working when the mains fails.

Nice TO5024 price in Oman

Price: OMR 296.000 for the Nice Toona 5 TO5024 set for a two leaf gate, in stock at our shop in Al Khuwair, Muscat. Installation and the optional backup battery are quoted after we see the gate.

What you need for a two leaf gate

PartWhat it does
Two Nice TO5024 gearmotors, 24VOne linear arm for each leaf, irreversible so the gate stays locked
Nice MC824H control unitRuns both motors through their encoders, the safety devices and automatic closing
Remotes and receiverOpen and close the gate from the car
A pair of photocellsStop the gate closing on a car or a person
Flashing lightWarns that the gate is moving
Optional backup batteryKeeps the gate working in a power cut

The TO5024 needs the Nice MC824H, because it is the control unit with the encoder input this motor uses. A 230V control unit will not run it.

Nice TO5024 technical data

DataValue
ModelNice Toona 5, TO5024
Motor24V DC, irreversible
Maximum leaf length5 m
Maximum force1800 N
Work cycleUp to 95 cycles per hour
Position controlMagnetic encoder
Stop on openingMechanical stop built in
Control unitNice MC824H, with encoder input
Protection ratingIP44

These figures come from European Nice dealer listings. Speed varies with the gate geometry, so we set it on site.

Why a 24V swing gate motor?

A 24V swing gate motor works at low voltage, which gives the control unit fine control over speed and force at every point of the stroke.

FeatureWhat it means for you
Soft start and soft stopEach leaf starts and stops gently, with less strain on hinges and pillars
Fine force controlThe gate reverses sooner if it meets a car or a person
High work cycle, up to 95 an hourCopes with a busy compound or office gate
Battery backup possibleThe gate keeps working in a power cut

For a wide 5 m leaf, that smooth control matters: a heavy leaf that slams into its stop at full force wears the hinges and the motor fast. A 24V swing gate motor slows down before each end.

The magnetic encoder: precise positions every time

The magnetic encoder tells the control unit exactly where each leaf is at every moment. The Nice MC824H uses it to slow each leaf before the end, to stop it in the same place every time, and to detect an obstacle by a change in movement. A motor without a magnetic encoder relies on timing or limit switches, which drift as the gate and hinges wear.

The encoder also lets the control unit learn the gate on its own during setup, so the installation is faster and more accurate.

A swing gate motor with battery backup

Power cuts in Oman are short but frequent, and a large swing gate is heavy to open by hand. With a backup battery fitted to the Nice MC824H, the TO5024 becomes a swing gate motor with battery backup: it keeps opening and closing for a number of cycles when the mains fails, and the battery recharges when power returns.

Without a batteryAs a swing gate motor with battery backup
The gate stops when the power failsThe gate keeps working through the cut
Someone opens each leaf by hand with the keyNo need to go out to the gate in the heat

Nice TO5024 or the 230V Toona 5

Nice TO5024Nice Toona 5 TO5016
Motor24V DC with magnetic encoder230V AC
Control unitNice MC824HNice MC800
Maximum leaf5 m5 m
Force1800 N1800 N
Work cycleUp to 95 per hour54 per hour
Battery backupYes, optionalNo
PriceOMR 296.000OMR 296.000

At the same price, choose the TO5024 for busy gates, smoother movement and battery backup. Choose the 230V TO5016 for simple wiring on a site with stable power. For leaves up to 4 m, see the Nice Toona 4, and all our Nice swing gate motors.

How we install the Nice TO5024 and Nice MC824H

  • We check the hinges first: a 5 m leaf must swing freely by hand before any motor goes on.
  • We measure the pillar and set the bracket positions for the right opening angle.
  • We fix both motors, and use the built in mechanical stop on opening plus a closing stop.
  • We fit the photocells, the flashing light and the Nice MC824H, and the battery if ordered.
  • We run the learning cycle so the encoders set each leaf, then set the force and pause, and test the photocells while the gate closes.

The TO5024 in the Oman heat, sand and salt

ProblemWhat helps
Summer heat on the motorsThe 24V soft start keeps the load low; keep the hinges free running
Sand on the arms and photocellsClean the arms and lenses at every service
Salt air in Sohar, Sur, Salalah and DuqmService coastal sites more often and grease the arms
Power cutsFit the backup battery, or open each leaf with the release key

Supply and fitting across Oman

We are a physical shop in Al Khuwair, Muscat with our own engineers. They supply, fit and service Nice gate automation across all eleven governorates: Muscat, Al Batinah North, Al Batinah South, Ad Dakhiliyah, Ash Sharqiyah North, Ash Sharqiyah South, Adh Dhahirah, Al Buraimi, Al Wusta, Dhofar and Musandam. That reaches Sohar in Al Batinah North, Nizwa in Ad Dakhiliyah, Sur in Ash Sharqiyah South, Salalah in Dhofar and Duqm in Al Wusta.

Visit us at Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman. Call or WhatsApp +968 78109286, or email contact@doorsauto.com. Send us the leaf width, the gate weight and a photo of the pillars, and we confirm the right motor before you pay.

Nice TO5024 FAQ

What is the Nice TO5024?

The 24V version of the Nice Toona 5: a 24V swing gate motor for leaves up to 5 m, with a magnetic encoder, 1800 N of force and up to 95 cycles an hour.

Which control unit does the TO5024 need?

The Nice MC824H, the control unit with the encoder input the TO5024 uses.

Can the TO5024 work in a power cut?

Yes. With a backup battery fitted to the MC824H, it becomes a swing gate motor with battery backup and keeps working for a number of cycles.

What is the difference between the TO5024 and the TO5016?

The TO5024 is the 24V Toona 5 with a magnetic encoder and battery backup option. The TO5016 is the 230V version on the MC800.

What is the Nice TO5024 price in Oman?

OMR 296.000 for the set for a two leaf gate, in stock at our Muscat shop. Installation and the backup battery are quoted after we see the gate.

NICE TOONA 5 TO5024 Specifications

  • Brand: NICE
  • Model: TOONA 5 TO5024
  • Product Type: Swing Gate Motor
  • Capacity: Standard residential and commercial installations
  • Build: heavy duty internal gearing
  • Application: offices, showrooms and light industrial sites
  • Availability: In stock in Oman, delivery nationwide

Reviews

There are no reviews yet.

Be the first to review “Nice Toona 5 TO5024 24V Swing Gate Motor in Oman”

Your email address will not be published. Required fields are marked *

Nice Toona 5 TO5024 24V swing gate motor with magnetic encoder for leaves up to 5 m, sold and installed in Oman by Doors Auto.
Nice Toona 5 TO5024 24V Swing Gate Motor in Oman OMR 296.000
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist