CAME BY-3500T Industrial Sliding Gate Motor Oman, 3500 kg Three Phase
The CAME BY-3500T is an industrial electromechanical sliding gate motor from CAME Italy for gates up to 3,500 kg, listed as a three phase motor with an intensive duty cycle and high torque. It is for factories, depots, ports and large compounds. Supplied across Oman by Doors Auto, with the supply, control panel and rack confirmed before you buy.
Description
The CAME BY-3500T is an industrial electromechanical sliding gate motor from CAME Italy, for gates up to 3,500 kg. CAME lists it as a three phase motor with high torque and an intensive duty cycle, built for factories, depots, ports and large compounds. It is not a villa motor.
Two points come first. It needs a three phase supply, which many sites do not have, so we check before you buy. And the listing does not say whether the control panel, the rack or any safety devices are included, so we quote each item line by line.
CAME BY-3500T price in Oman and what we quote with it
Price: OMR 872.000, in stock at our Muscat shop. Installation is quoted separately once we have seen the site.
The listing does not state the box contents. A gate this heavy needs more than the motor, so we do not call this a kit. Before you pay, we confirm what the price covers.
| Item | Does the price include it? |
|---|---|
| The BY-3500T motor | Yes |
| Control panel | We confirm |
| Steel rack | We confirm, and quote the module and length |
| Photocells, safety edges, warning lamp | We confirm and quote what you need |
| Remotes and receiver | We confirm |
3500 kg sliding gate motor in Oman: is it the right motor
This motor is built for the heaviest gates. For a house or a normal compound, a smaller CAME motor costs far less and does the job.
| Your gate | Our advice |
|---|---|
| Up to about 800 kg, a home gate | The CAME BX range |
| 800 kg to about 1800 kg | The CAME BXV or BK range |
| 1800 kg to 2500 kg | The CAME BK 2200 kg or the BKV 2500 kg |
| 2500 kg to 3500 kg, an industrial gate | The CAME BY-3500T |
| Over 3500 kg | Ask us, we do not size past the listed limit |
If your gate weighs close to a limit, step up to the next motor. A larger motor runs cooler and lasts longer on the same gate.
Three phase sliding gate motor: what your site needs
CAME lists the BY-3500T as a three phase motor. A three phase motor runs from three live conductors, which most houses do not have. Many factories, depots and farms do. The listing says “230V three phase”, which is unusual, because three phase supplies are normally higher. We confirm the exact supply with CAME, so your electrician installs the right cable and protection.
| Your site | What to check |
|---|---|
| A factory, depot or port with three phase supply | Confirm the voltage and the breaker size |
| A site with single phase only | This motor will not suit it, choose a single phase CAME motor |
| A site that could add three phase | Ask your utility and your electrician first |
Intensive duty and high torque: what CAME lists
The listing describes high torque, an intensive duty cycle and operation built for continuous use. It gives no numbers for any of them, so we do not quote a percentage or a figure. We ask CAME for the duty rating, the torque and the speed, and give them to you in the quote.
That matters for a gate that runs all day. A rating on paper is only worth something when it matches how your gate is used.
Frame, track and foundation for a 3500 kg gate
A motor does not carry the gate. The frame, the track, the rollers and the foundation do. On a gate this heavy, those parts matter more than the motor. We check four things before we quote.
| What we check | Why it matters |
|---|---|
| The gate frame | It must be rigid, with no flex along its length |
| The track and rollers | They must carry the full weight and roll freely |
| The foundation | It must hold the motor and the track without moving |
| The gate by hand | It should roll with moderate effort before any motor is fitted |
Rack, pinion and control panel for the CAME BY-3500T
The listing does not state the pinion module, the maximum gate length or the control panel. At this weight we quote steel rack, and we confirm the module with CAME first. The rack and the pinion must share a module, or they will not mesh. The rack must also run along the whole leaf, so a long gate needs a large run, fixed straight.
The control panel is the unit that runs the motor and its safety devices. We confirm which panel suits this motor, whether it is included and what it needs, before we quote.
Safety on an industrial sliding gate
A heavy gate that moves can cause serious harm. We fit photocells across the opening, safety edges on the leading edge and the closing post, and a warning lamp. The photocells must match the control panel. We do not guess the type, and we do not sell a heavy gate without safety devices.
CAME remote controls and access control
The listing does not state the radio frequency or any receiver. A CAME receiver pairs only with CAME handsets. Somfy, BFT and Nice remotes cannot pair with it, because each brand uses its own coding. An industrial site often wants a keypad, a card reader or an intercom as well, and we confirm that with you at the survey.
Heat and dust: the CAME BY-3500T in Oman
The listing says the motor is built for harsh and extreme conditions but publishes no IP rating or temperature range, so we do not quote either. We mount the motor in shade where we can, on a raised base clear of standing water and blown sand, and we protect the control panel from direct sun. Keep the track clean, because sand wears rollers and rack faster than any motor fault.
CAME BY-3500T specification
| Type | Industrial electromechanical sliding gate motor |
|---|---|
| Maker | CAME, Italy |
| Maximum gate weight | 3,500 kg |
| Supply | Three phase, listed as 230V |
| Duty | Intensive, no rating given |
| Torque | High, no value given |
| Power, current, speed, pinion module, gate length, IP rating, temperature, dimensions, control panel, radio frequency, battery backup, box contents, warranty | Not published |
CAME industrial sliding gate motor Muscat: supply and fitting across Oman
We are a physical shop in Al Khuwair, Muscat with our own engineers. They fit, programme and service sliding gate motors across all eleven governorates: Muscat, Al Batinah North, Al Batinah South, Ad Dakhiliyah, Ash Sharqiyah North, Ash Sharqiyah South, Adh Dhahirah, Al Buraimi, Al Wusta, Dhofar and Musandam. That reaches Sohar in Al Batinah North, Nizwa in Ad Dakhiliyah, Sur in Ash Sharqiyah South, Salalah in Dhofar and Duqm in Al Wusta.
Visit us at Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman. Call or WhatsApp +968 78109286, or email contact@doorsauto.com. Send the weight, the length, the supply and a photo of your gate through the contact page. Compare more in our sliding gate opener range, or visit the Doors Auto shop.
CAME BY-3500T FAQ
What is the CAME BY-3500T?
An industrial electromechanical sliding gate motor from CAME Italy for gates up to 3,500 kg, listed as a three phase motor with an intensive duty cycle and high torque.
Does the CAME BY-3500T need a three phase supply?
Yes. It is listed as a three phase motor, so your site needs a three phase supply. We confirm the exact voltage with CAME, and your electrician sizes the cable and the protection.
What is in the box with the CAME BY-3500T?
The listing does not say. The control panel, rack, photocells and remotes may be extra, so we confirm what the price covers and quote each item for your gate.
Will my Somfy or BFT remote work with the CAME BY-3500T?
No. A CAME receiver pairs only with CAME handsets, because each brand uses its own coding. You need CAME remotes.
What is the CAME BY-3500T price in Oman?
OMR 872.000, in stock at our Muscat shop. Installation is quoted separately once we have seen the site.
Do you fit a CAME industrial sliding gate motor in Muscat and across Oman?
Yes. Our engineers fit and programme CAME motors in Muscat, Sohar, Nizwa, Sur, Salalah, Duqm and across all eleven governorates.








Reviews
There are no reviews yet.