No Touch Exit Button in Oman | Touchless Infrared Door Release
An infrared exit button that releases the door when a hand passes near it. Nothing is pressed, so there is no shared surface — the reason clinics, kitchens and laboratories choose it. Unlike a push button it needs its own 12 V supply. Not for outdoor use. In stock at our Al Khuwair shop in Muscat.
Description
A no touch exit button releases the door when a hand comes near the sensor. Nothing is pressed, so there is no surface for people to share. We stock the no touch exit button in Oman at our shop in Al Khuwair, Muscat.
This one needs its own power
Every other exit button we sell is a passive switch. This one is not. An infrared sensor has to be powered to watch for a hand.
Run a twelve volt feed to it alongside the lock wiring. Installers used to plain buttons miss this and wonder why nothing happens.
Where a no touch exit button earns its price
Clinics, treatment rooms, laboratories, kitchens and food handling areas. Anywhere hands are clean, gloved or full.
It also suits a workshop door where hands are oily. A sensor does not care what is on your fingers.
No touch exit button or a push button
A push button is cheaper, needs no power and keeps working if the controller dies. That makes it the safer default.
Choose no touch where hygiene or gloved hands matter more than simplicity. On a busy clinic door it pays for itself in cleaning alone.
Setting the delay on a no touch exit button
Most units let you set how long the lock stays released. A short delay suits a single person leaving.
A longer delay suits a trolley or a stretcher going through. Set it once at commissioning and leave it.
What’s included
The sensor plate and fixing screws. Cabling, the power supply and the lock itself are separate.
Common questions
Does it need its own power supply?
Yes. That is the main difference from a push button, so allow for it when sizing the supply.
How close does my hand need to be?
A few centimetres in front of the sensor. Send us your unit and we will confirm the range.
What happens if the power fails?
The sensor stops working, so fit a mechanical release as well on any door people must leave through.
Does it work with gloves or wet hands?
Yes. That is the point of it, and it is why kitchens and clinics choose it.
See the rest of our access control range in Oman, including RFID cards and electric strikes.
No Touch Exit Button Specifications
- Product Type: Infrared no touch exit button for access control
- Operation: Wave a hand near the sensor. No contact with the plate
- Power Required: Yes. Unlike a push button, the sensor needs its own supply
- Contact Output: NO, NC and COM
- Release Delay: Adjustable. Confirm the range with us before ordering
- Indicator: LED on the plate
- Sensing Distance: A few centimetres. Confirm with us
- Mounting: Indoor, on the wall beside the door at handle height
- Suitable For: Clinics, treatment rooms, laboratories, kitchens, food handling areas and workshops
- Not Suitable For: Outdoor or wet locations, and as the only release on a door people must always be able to leave through
- Works With: Magnetic locks, electric strikes, bolt locks, rim locks and access controllers
- Alternative: A plain push button where hygiene is not a factor
Additional information
| Format | No touch |
|---|---|
| Operation | Infrared sensor |
| Power required | Yes, 12 V |
| Contact output | NO / NC / COM |
| Release delay | Adjustable |
| Location | Indoor |








Reviews
There are no reviews yet.