Nice Toona 6 TO6024HS 6 m Swing Gate Motor in Oman

SKU: 3096
Genuine & Authorized Product
Official Dealer Authorized in Oman
Fast Delivery Across all of Oman
1 Year Warranty On installation
OMR 462.000
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: 3096 Categories: , Brand:

Nice Toona 6 (TO6024HS) 24V high speed swing gate motor for leaves up to 6 m or 1450 kg, with a magnetic encoder and mechanical stops, opening to 90 degrees in about 26 to 30 seconds. Built for the widest villa and compound gates, with a backup battery option for power cuts.

OMR 462.000, in stock in Muscat, with fitting across Oman.

Description

The Nice Toona 6 (model Nice TO6024HS) is a 6 m swing gate motor from Nice, for leaves up to 6 m long or up to 1450 kg. It is a 24V high speed swing gate motor with a magnetic encoder and mechanical stops, which opens a leaf to 90 degrees in about 26 to 30 seconds, quick for a heavy swing gate motor of this size.

It is the motor we choose for the widest and heaviest swing gates at villas, compounds and commercial entrances in Oman, where a 4 or 5 m motor would be pushed past its limit.

Nice Toona 6 price in Oman

Price: OMR 462.000 for the Nice Toona 6 set for a two leaf gate, in stock at our shop in Al Khuwair, Muscat. That covers a 6 m swing gate motor on each leaf. Installation is quoted after we see the gate.

What you need with the Nice TO6024HS

PartWhat it does
Two Nice TO6024HS gearmotors, 24VOne linear arm for each leaf, irreversible so the gate stays locked
24V Nice control unit with encoder inputRuns both motors through their encoders, the safety devices and automatic closing
Remotes and receiverOpen and close the gate from the car
A pair of photocellsStop the gate closing on a car or a person
Flashing lightWarns that a wide, heavy leaf is moving
Optional backup batteryKeeps the gate working in a power cut

On a gate this size, we treat the flashing light and a second pair of photocells as essential: a 6 m leaf sweeps a large area as it swings.

Nice TO6024HS technical data

DataValue
Maximum leaf6 m long, or up to 1450 kg
Supply24V DC
Current5 A
Power120 W
Speed0.016 m per second at the arm
Opening timeAbout 26 to 30 seconds to 90 degrees
Position controlMagnetic encoder
StopsMechanical stops built in
Protection ratingIP44

These figures come from the Nice Toona HS datasheet and European dealer listings. Opening time depends on the gate geometry and the bracket positions, so we confirm it on site.

Why a 6 m swing gate motor?

Most swing motors stop at 4 or 5 m. A 6 m leaf needs a longer stroke and far more leverage, and on a solid steel gate the weight can run to well over a tonne. A 6 m swing gate motor like the Toona 6 is built for that load, so it moves the leaf smoothly instead of straining at the start of every opening.

Your gateOur advice
Leaves up to 4 mThe Nice Toona 4 is enough
Leaves up to 5 mThe Nice Toona 5 or the Nice TO5024
Leaves from 5 to 6 m, or very heavyThe Nice Toona 6 is the right size
Leaves over 6 mSee the Nice Toona 7

Wind matters more as leaves get wider. A 6 m solid leaf acts like a sail in a shamal, so before fitting a 6 m swing gate motor we check the pillars and hinges too. See all our Nice swing gate motors.

A high speed swing gate motor for heavy leaves

Large swing motors are usually slow: a wide leaf can take 40 seconds or more to open, with cars waiting in the street. The Toona 6 is a high speed swing gate motor, built to swing a heavy leaf to 90 degrees in about half a minute while still slowing down gently at each end.

FeatureWhat it means for you
High speed 24V motorShorter waits at the gate, even with 6 m leaves
Magnetic encoderThe control unit knows where each leaf is, and slows it before the end
Mechanical stopsEach leaf stops in the same place every time
Irreversible gearHolds a heavy leaf shut against wind and pushing

That mix of size and speed makes the Toona 6 the heavy swing gate motor for compounds and busy commercial entrances, where a slow gate quickly becomes a queue.

24V control, safety and battery backup

As a 24V high speed swing gate motor, the Nice TO6024HS gives the control unit fine control over force at every point of the stroke. If a leaf meets a car or a person, it stops and reverses sooner than a fixed force motor would. With the encoder, the control unit also learns the gate on its own during setup.

A 24V system can run from a backup battery, so the gate keeps working through a power cut. On a 6 m leaf that matters: opening a gate of this weight by hand with the release key is hard work in the summer heat.

How we install the Nice TO6024HS

  • We check the hinges and pillars first: a 6 m leaf puts heavy load on both, and it must swing freely by hand.
  • We measure each pillar and set the bracket positions for the right opening angle and leverage.
  • We fix both motors and set the mechanical stops so each leaf stops in the right place.
  • We fit the photocells, a second pair along the swing area where needed, the flashing light and the control unit.
  • We run the learning cycle so the encoders set each leaf, then set the force, the leaf delay and the pause, and test the photocells while the gate closes.

The Toona 6 in the Oman heat, sand and salt

ProblemWhat helps
Summer heat on the motorsThe 24V soft start keeps the load low; keep the hinges free running
Sand on the arms and photocellsClean the arms and lenses at every service
Salt air in Sohar, Sur, Salalah and DuqmService coastal sites more often and grease the arms
Wind on wide leavesCheck the pillars, hinges and brackets at every service

A heavy swing gate motor on a wide gate deserves a regular service. We offer maintenance visits for villas and compounds across Oman.

Nice Toona 6 specification

ModelNice Toona 6, TO6024HS
Type24V high speed swing gate motor with a linear arm
Use6 m swing gate motor for heavy villa and compound gates
Leaf sizeUp to 6 m, or up to 1450 kg
Supply and power24V DC, 5 A, 120 W
Opening timeAbout 26 to 30 seconds to 90 degrees
Position controlMagnetic encoder, mechanical stops
Protection ratingIP44
PriceOMR 462.000

Supply and fitting across Oman

We are a physical shop in Al Khuwair, Muscat with our own engineers. They supply, fit and service Nice gate automation across all eleven governorates: Muscat, Al Batinah North, Al Batinah South, Ad Dakhiliyah, Ash Sharqiyah North, Ash Sharqiyah South, Adh Dhahirah, Al Buraimi, Al Wusta, Dhofar and Musandam. That reaches Sohar in Al Batinah North, Nizwa in Ad Dakhiliyah, Sur in Ash Sharqiyah South, Salalah in Dhofar and Duqm in Al Wusta.

Visit us at Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman. Call or WhatsApp +968 78109286, or email contact@doorsauto.com. Send us the leaf width, the gate weight and a photo of the pillars, and we confirm the right motor before you pay.

Nice Toona 6 FAQ

What is the Nice Toona 6?

The Nice TO6024HS: a 24V high speed swing gate motor for leaves up to 6 m or 1450 kg, with a magnetic encoder and mechanical stops.

How fast does the Nice Toona 6 open?

About 26 to 30 seconds to 90 degrees, depending on the gate geometry and the bracket positions.

Is the Toona 6 a heavy swing gate motor?

Yes. It is a heavy swing gate motor rated for leaves up to 1450 kg, for the heaviest villa and compound gates.

Should I choose the Toona 5 or the Toona 6?

The Toona 5 suits leaves up to 5 m. For leaves from 5 to 6 m, or very heavy gates, choose the Nice Toona 6.

What is the Nice Toona 6 price in Oman?

OMR 462.000 for the set for a two leaf gate, in stock at our Muscat shop. Installation is quoted after we see the gate.

  • Type: Swing Gate Motor
  • Compatibility: Various gate types
  • Power: Efficient and robust
  • Features: Obstacle detection, auto-reverse
  • Installation: Easy and intuitive
Nice Toona 6 TO6024HS 24V high speed swing gate motor for leaves up to 6 m, sold and installed in Oman by Doors Auto.
Nice Toona 6 TO6024HS 6 m Swing Gate Motor in Oman OMR 462.000
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist