Nice WG4000 Wingo 2 m Swing Gate Motor in Oman

SKU: NICE_WG4000
Genuine & Authorized Product
Official Dealer Authorized in Oman
Fast Delivery Across all of Oman
1 Year Warranty On installation
OMR 185.000
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: NICE_WG4000 Categories: , Brand:

Nice WG4000 Wingo swing gate motor for leaves up to 2 m: 230V, 200 W, 1500 N, 30 cycles an hour, IP44, with a built in capacitor and pre assembled opening stop. Sold as a single motor, for a single leaf gate, a pedestrian gate or as a replacement arm on a Nice Wingo gate.

OMR 185.000 per motor, in stock in Muscat, with fitting across Oman.

Description

The Nice WG4000 is a 2 m swing gate motor from the Nice Wingo range: a compact, surface mounted 230V arm for leaves up to 2 m, with 1500 N of force and a built in capacitor. Sold as a single motor, it is the small swing gate motor for a pedestrian gate, a single leaf gate or a narrow villa gate, and the replacement swing gate motor when one arm on an existing Nice Wingo gate fails.

Made in Italy, it is light at 6 kg and quick to fit, with its opening stop already assembled.

Nice WG4000 price in Oman

Price: OMR 185.000 for one Nice WG4000 motor, in stock at our shop in Al Khuwair, Muscat. A double leaf gate needs two motors and a control unit; we quote the full set, and installation, after we see the gate.

Nice WG4000 technical data

DataValue
Maximum leaf length2 m
Supply230V AC, 50 Hz
Current1.5 A
Power200 W
Maximum force1500 N
Speed0.016 m per second
Work cycle30 cycles per hour
CapacitorBuilt in
Opening stopPre assembled
Manual releasePersonalised Nice key
Protection ratingIP44
Working temperatureMinus 20 to plus 50°C
Dimensions770 x 98 x 95 mm
Weight6 kg

These figures come from the supplier listing of the Nice data. A work cycle of 30 an hour is plenty for a home gate or a pedestrian gate.

A small swing gate motor for 2 m leaves

Large motors on small gates waste money and space. The WG4000 is a small swing gate motor sized for narrow leaves: short, slim and light enough to sit on a thin pillar, yet strong enough at 1500 N for a solid steel leaf up to 2 m.

Your gateOur advice
A pedestrian gate or a single leaf gate up to 2 mOne Nice WG4000 and a control unit
A double leaf villa gate with leaves up to 2 m eachTwo WG4000 motors and a control unit, or the Nice Wingo 4 kit
Leaves up to 4 mChoose the Nice Toona 4
Leaves up to 5 mChoose the Nice Toona 5

A 2 m swing gate motor is the right fit for most side gates and pedestrian gates in Oman. For anything wider, see all our Nice swing gate motors.

A replacement swing gate motor for Nice Wingo gates

Many Nice Wingo gates in Muscat have run for years on two arms, and often only one fails. Because we sell the WG4000 as a single motor, you can replace just the failed arm instead of buying a whole kit. As a replacement swing gate motor it fits the same Nice control unit, so the remotes and photocells you already have keep working.

  • Bring us the old motor, or a photo of its label, and we confirm the match.
  • We fit the new arm, check the brackets and hinges, and set the force on the control unit.
  • We check the second arm at the same visit, since it has done the same number of cycles.

Automating a single leaf gate

A single leaf gate, such as a side entrance or a pedestrian gate, needs only one motor. A single WG4000 with a Nice control unit gives remote opening, automatic closing and photocell safety, just like a main gate. It can also be linked to the main gate system, so one remote button opens the car gate and another opens the single leaf gate.

For staff and visitors, a keypad or an intercom on a single leaf gate is often more useful than a remote, and the control unit accepts both.

What you need with the Nice WG4000

PartWhy
Nice control unit for 230V swing motorsRuns one or two WG4000 motors and the safety devices
Remotes and receiverOpen and close the gate from the car or on foot
A pair of photocellsStop the gate closing on a person or a car
Flashing lightWarns that the gate is moving
Optional keypad, intercom or GSM openerAccess without a remote

For a replacement swing gate motor, you usually need the motor alone, because the control unit and accessories are already on site.

How we install a 2 m swing gate motor

  • We check the hinges first: the leaf must swing freely by hand before the motor goes on.
  • We measure the pillar and set the bracket positions for the right opening angle.
  • We fix the motor; the opening stop is already assembled, so we only set the closing stop.
  • We connect the motor to the control unit and fit the photocells and flashing light.
  • We set the force and the pause time, and test the photocells while the gate closes.

The WG4000 in the Oman heat, sand and salt

ProblemWhat helps
Summer heat on the motorRated to plus 50°C; keep the hinges free running
Sand on the arm and photocellsClean the arm and lenses at every service
Salt air in Sohar, Sur, Salalah and DuqmService coastal sites more often and grease the arm
Power cutsOpen the leaf by hand with the personalised Nice key

A small swing gate motor still needs care. We check the arm, the brackets and the hinges at every service visit across Oman.

Nice WG4000 specification

ModelNice Wingo WG4000
TypeSmall swing gate motor, the 2 m swing gate motor of the Nice Wingo range
Sold asSingle motor
Leaf lengthUp to 2 m
Supply and power230V AC, 200 W, 1.5 A
Force and speed1500 N, 0.016 m/s
Work cycle30 cycles per hour
Protection and temperatureIP44, minus 20 to plus 50°C
Size and weight770 x 98 x 95 mm, 6 kg
PriceOMR 185.000 per motor

Supply and fitting across Oman

We are a physical shop in Al Khuwair, Muscat with our own engineers. They supply, fit and service Nice gate automation across all eleven governorates: Muscat, Al Batinah North, Al Batinah South, Ad Dakhiliyah, Ash Sharqiyah North, Ash Sharqiyah South, Adh Dhahirah, Al Buraimi, Al Wusta, Dhofar and Musandam. That reaches Sohar in Al Batinah North, Nizwa in Ad Dakhiliyah, Sur in Ash Sharqiyah South, Salalah in Dhofar and Duqm in Al Wusta.

Visit us at Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman. Call or WhatsApp +968 78109286, or email contact@doorsauto.com. Send us the leaf width and a photo of the gate or the old motor label, and we confirm the right motor before you pay.

Nice WG4000 FAQ

What is the Nice WG4000?

A 2 m swing gate motor from the Nice Wingo range: 230V, 1500 N, sold as a single motor.

Is the price for one motor or a pair?

One motor. A double leaf gate needs two WG4000 motors and a control unit, or the Nice Wingo 4 kit.

Can I use the WG4000 as a replacement swing gate motor?

Yes. It replaces one failed arm on a Nice Wingo gate and works with the existing control unit, remotes and photocells.

Can one WG4000 automate a single leaf gate?

Yes. One motor with a Nice control unit automates a single leaf gate or a pedestrian gate up to 2 m.

What is the Nice WG4000 price in Oman?

OMR 185.000 per motor, in stock at our Muscat shop. Control units, accessories and installation are quoted after we see the gate.

NICE WG4000 Specifications

  • Brand: NICE
  • Model: WG4000
  • Product Type: Swing Gate Motor
  • Capacity: Standard residential and commercial installations
  • Build: weather sealed enclosure
  • Application: villas and private residences
  • Availability: In stock in Oman, delivery nationwide

Reviews

There are no reviews yet.

Be the first to review “Nice WG4000 Wingo 2 m Swing Gate Motor in Oman”

Your email address will not be published. Required fields are marked *

Nice WG4000 Wingo 230V swing gate motor for leaves up to 2 m, sold as a single motor in Oman by Doors Auto.
Nice WG4000 Wingo 2 m Swing Gate Motor in Oman OMR 185.000
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist