Nice Toona 5 TO5024 24V Swing Gate Motor in Oman
Nice TO5024 Toona 5 24V swing gate motor for leaves up to 5 m: magnetic encoder, 1800 N, up to 95 cycles an hour, on the Nice MC824H control unit with a backup battery option for power cuts.
OMR 296.000, in stock in Muscat, with fitting across Oman.
Description
The Nice TO5024 is the Toona 5 from Nice in its 24V version: a 24V swing gate motor for leaves up to 5 m, with a magnetic encoder, 1800 N of force and a work cycle of up to 95 cycles an hour. It runs on the Nice MC824H control unit, which reads the encoder and can take a backup battery, so it becomes a swing gate motor with battery backup for sites with power cuts.
It is the choice when a large swing gate needs smooth, precise movement and must keep working when the mains fails.
Nice TO5024 price in Oman
Price: OMR 296.000 for the Nice Toona 5 TO5024 set for a two leaf gate, in stock at our shop in Al Khuwair, Muscat. Installation and the optional backup battery are quoted after we see the gate.
What you need for a two leaf gate
| Part | What it does |
|---|---|
| Two Nice TO5024 gearmotors, 24V | One linear arm for each leaf, irreversible so the gate stays locked |
| Nice MC824H control unit | Runs both motors through their encoders, the safety devices and automatic closing |
| Remotes and receiver | Open and close the gate from the car |
| A pair of photocells | Stop the gate closing on a car or a person |
| Flashing light | Warns that the gate is moving |
| Optional backup battery | Keeps the gate working in a power cut |
The TO5024 needs the Nice MC824H, because it is the control unit with the encoder input this motor uses. A 230V control unit will not run it.
Nice TO5024 technical data
| Data | Value |
|---|---|
| Model | Nice Toona 5, TO5024 |
| Motor | 24V DC, irreversible |
| Maximum leaf length | 5 m |
| Maximum force | 1800 N |
| Work cycle | Up to 95 cycles per hour |
| Position control | Magnetic encoder |
| Stop on opening | Mechanical stop built in |
| Control unit | Nice MC824H, with encoder input |
| Protection rating | IP44 |
These figures come from European Nice dealer listings. Speed varies with the gate geometry, so we set it on site.
Why a 24V swing gate motor?
A 24V swing gate motor works at low voltage, which gives the control unit fine control over speed and force at every point of the stroke.
| Feature | What it means for you |
|---|---|
| Soft start and soft stop | Each leaf starts and stops gently, with less strain on hinges and pillars |
| Fine force control | The gate reverses sooner if it meets a car or a person |
| High work cycle, up to 95 an hour | Copes with a busy compound or office gate |
| Battery backup possible | The gate keeps working in a power cut |
For a wide 5 m leaf, that smooth control matters: a heavy leaf that slams into its stop at full force wears the hinges and the motor fast. A 24V swing gate motor slows down before each end.
The magnetic encoder: precise positions every time
The magnetic encoder tells the control unit exactly where each leaf is at every moment. The Nice MC824H uses it to slow each leaf before the end, to stop it in the same place every time, and to detect an obstacle by a change in movement. A motor without a magnetic encoder relies on timing or limit switches, which drift as the gate and hinges wear.
The encoder also lets the control unit learn the gate on its own during setup, so the installation is faster and more accurate.
A swing gate motor with battery backup
Power cuts in Oman are short but frequent, and a large swing gate is heavy to open by hand. With a backup battery fitted to the Nice MC824H, the TO5024 becomes a swing gate motor with battery backup: it keeps opening and closing for a number of cycles when the mains fails, and the battery recharges when power returns.
| Without a battery | As a swing gate motor with battery backup |
|---|---|
| The gate stops when the power fails | The gate keeps working through the cut |
| Someone opens each leaf by hand with the key | No need to go out to the gate in the heat |
Nice TO5024 or the 230V Toona 5
| Nice TO5024 | Nice Toona 5 TO5016 | |
|---|---|---|
| Motor | 24V DC with magnetic encoder | 230V AC |
| Control unit | Nice MC824H | Nice MC800 |
| Maximum leaf | 5 m | 5 m |
| Force | 1800 N | 1800 N |
| Work cycle | Up to 95 per hour | 54 per hour |
| Battery backup | Yes, optional | No |
| Price | OMR 296.000 | OMR 296.000 |
At the same price, choose the TO5024 for busy gates, smoother movement and battery backup. Choose the 230V TO5016 for simple wiring on a site with stable power. For leaves up to 4 m, see the Nice Toona 4, and all our Nice swing gate motors.
How we install the Nice TO5024 and Nice MC824H
- We check the hinges first: a 5 m leaf must swing freely by hand before any motor goes on.
- We measure the pillar and set the bracket positions for the right opening angle.
- We fix both motors, and use the built in mechanical stop on opening plus a closing stop.
- We fit the photocells, the flashing light and the Nice MC824H, and the battery if ordered.
- We run the learning cycle so the encoders set each leaf, then set the force and pause, and test the photocells while the gate closes.
The TO5024 in the Oman heat, sand and salt
| Problem | What helps |
|---|---|
| Summer heat on the motors | The 24V soft start keeps the load low; keep the hinges free running |
| Sand on the arms and photocells | Clean the arms and lenses at every service |
| Salt air in Sohar, Sur, Salalah and Duqm | Service coastal sites more often and grease the arms |
| Power cuts | Fit the backup battery, or open each leaf with the release key |
Supply and fitting across Oman
We are a physical shop in Al Khuwair, Muscat with our own engineers. They supply, fit and service Nice gate automation across all eleven governorates: Muscat, Al Batinah North, Al Batinah South, Ad Dakhiliyah, Ash Sharqiyah North, Ash Sharqiyah South, Adh Dhahirah, Al Buraimi, Al Wusta, Dhofar and Musandam. That reaches Sohar in Al Batinah North, Nizwa in Ad Dakhiliyah, Sur in Ash Sharqiyah South, Salalah in Dhofar and Duqm in Al Wusta.
Visit us at Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman. Call or WhatsApp +968 78109286, or email contact@doorsauto.com. Send us the leaf width, the gate weight and a photo of the pillars, and we confirm the right motor before you pay.
Nice TO5024 FAQ
What is the Nice TO5024?
The 24V version of the Nice Toona 5: a 24V swing gate motor for leaves up to 5 m, with a magnetic encoder, 1800 N of force and up to 95 cycles an hour.
Which control unit does the TO5024 need?
The Nice MC824H, the control unit with the encoder input the TO5024 uses.
Can the TO5024 work in a power cut?
Yes. With a backup battery fitted to the MC824H, it becomes a swing gate motor with battery backup and keeps working for a number of cycles.
What is the difference between the TO5024 and the TO5016?
The TO5024 is the 24V Toona 5 with a magnetic encoder and battery backup option. The TO5016 is the 230V version on the MC800.
What is the Nice TO5024 price in Oman?
OMR 296.000 for the set for a two leaf gate, in stock at our Muscat shop. Installation and the backup battery are quoted after we see the gate.
NICE TOONA 5 TO5024 Specifications
- Brand: NICE
- Model: TOONA 5 TO5024
- Product Type: Swing Gate Motor
- Capacity: Standard residential and commercial installations
- Build: heavy duty internal gearing
- Application: offices, showrooms and light industrial sites
- Availability: In stock in Oman, delivery nationwide








Reviews
There are no reviews yet.