BFT Deimos BT A600 Sliding Gate Motor Kit 600 KG Oman
The BFT Deimos BT A600 is an Italian made 24V sliding gate motor rated to 600 kg at intensive duty, running at 12 m/min with slowdown at both ends, D Track obstacle sensing and the HAMAL control unit. Supplied as a kit with two Mitto2 rolling code remotes, photocells, a blinker light, a push button, a fixing plate and four metres of rack. Fitted across Oman from our Al Khuwair shop.
Description
The BFT Deimos BT A600 beats the AC A600 on every specification and costs less
We stock both, so we would rather tell you than let you find out. Against the Deimos AC A600 beside it in this category, this motor runs faster. It also stops more gently, handles harder use, and draws a fraction of the power. Above all, it costs less.
| Deimos BT A600 | Deimos AC A600 | |
|---|---|---|
| Motor | 24V | 230V AC |
| Battery backup | You can add batteries | Not an option |
| Leaf speed | 12 m/min | 9 m/min |
| Slowdown | Yes, both ends | None |
| Obstacle reaction | D Track | Mechanical clutch |
| Frequency of use | Intensive | Semi intensive |
| Power consumption | 70 W | 400 W |
In short, the AC version wins on nothing. So if you are choosing between the two at 600 kg, choose this one. That said, the Deimos AC A600 still suits anyone who specifically needs a mains motor.
What 24V means on the BFT Deimos BT A600
The BT in the model name matters. The motor runs on 24V from a 230V control board, so you can fit backup batteries.
With batteries, the gate keeps opening through a power cut. Without them you use the release key, as on any other motor. Either way the option stays open, because an AC model never gives you that choice.
The 24V motor also explains the 70 W draw against 400 W on the mains version. On a gate cycling many times a day, that difference becomes real money.
Slowdown, D Track and intensive duty on the BFT Deimos BT A600
Three specifications here do work that cheaper motors leave to your gate.
Slowdown at both ends eases the leaf into its stops instead of letting it arrive at full speed. As a result, the wheels, the track and the frame survive years of use. It also decides whether the whole street hears your gate at six in the morning.
D Track reads the torque the motor produces, then adapts when the gate meets resistance. A friction clutch simply slips, while a basic system just cuts out. Meanwhile the photocells in the kit protect people, so always wire them and test them.
Intensive duty is the full rating, not the semi intensive one on the AC models. So a compound entrance, a busy workshop or a car park gate sits inside this motor’s designed use.
BFT Deimos BT A600 specifications
| Specification | Value |
|---|---|
| Product code | P925224 00002 |
| Maximum gate weight | 600 kg |
| Motor voltage | 24V |
| Board power supply | 230V |
| Power consumption | 70 W |
| Leaf speed | 12 m/min |
| Pinion module | Module 4 |
| Limit switch type | Electromechanical |
| Control unit | HAMAL |
| Obstacle reaction | D Track |
| Slowdown | Yes, both directions |
| Locking | Mechanical, with personal release key |
| Frequency of use | Intensive |
| Battery backup | You can add batteries, because the motor runs on 24V |
| IP rating | IP24 |
| Operating temperature | Minus 20 C to plus 55 C |
| Maximum torque | The supplier does not publish this |
| Maximum leaf length | BFT does not publish this for the model. Other Deimos BT documentation gives 6 m |
Measure your leaf and send us the figure before ordering, because BFT publishes no length limit against this code. On many Omani gates, the leaf length binds before the weight does.
BFT Deimos BT A600 vs Deimos Ultra BT A600
Both run on 24V and both reach 600 kg, so capacity does not separate them. However, the Deimos Ultra BT A600 adds magnetic limit switches and U Link integration.
Magnetic limits carry no moving contact, so nothing wears or bends. Electromechanical ones drift out of adjustment over years, because a heavy gate shakes the housing at every stop. In fact, drifting limits are one of the most common service calls we attend.
Therefore, if the gate is heavy, busy or awkward to revisit, the Ultra earns the difference. On an ordinary villa gate, though, this motor is the sensible buy.
Deimos BT A600 kit contents, rack length, and what is not included
The kit includes:
- BFT Deimos BT A600 operator with the HAMAL control unit built in
- 2 x BFT Mitto2 remote controls, 433.92 MHz rolling code
- 1 x pair of BFT outdoor photocells
- 1 x blinker light
- 1 x push button
- 4 x nylon rack, one metre each
- 1 x fixing plate
Check the rack before delivery day. Four metres covers a four metre leaf and no more, because rack runs the full length of the gate leaf rather than the opening width. Nylon suits 600 kg reasonably well. On a solid heavy leaf, however, we would recommend galvanised steel instead.
We stock the BFT nylon rack and the BFT CVZ D571053 steel rack in one metre lengths. Either one must be module 4, so it meshes with this pinion.
The kit does not include:
- Backup batteries
- Rack beyond four metres
- The concrete foundation and its cable ducting
- A keypad or card reader
- Any mains work at the gate position
Finally, for extra transmitters see BFT remotes, and for spare boards see BFT accessories.
IP24 and dust, siting a BFT sliding gate motor in Oman
IP24 appears on every BFT slider listing, but nobody explains it. The 4 means the casing resists splashing water from any direction. However, the 2 covers only solid objects above 12.5 mm. In short, that rating carries no dust protection at all.
On a sheltered villa gate in Muscat, that is manageable. On an exposed roadside gate in Nizwa, Sohar or Duqm, though, plan for blown sand. So set the operator clear of ground level, keep the cover seal and cable glands intact, then book a service clean before a fault appears. The 55 C ceiling is real too, so give the unit shade where the site allows.
BFT Deimos BT A600 installation across Oman
The groundwork is the job, not the motor. First, pour a level foundation at the correct height and offset. Then run the ducting before the concrete goes down. Next, align the rack so the pinion carries the drive rather than the gate hanging on it. Finally, tune the slowdown to the real leaf weight instead of leaving it at default.
Sort the gate first, though. A leaf on tired wheels or a fouled track fails long before it troubles this motor. Our engineers install and service BFT across Muscat, Sohar, Nizwa, Sur, Salalah and Duqm. For the wider range, see BFT sliding gate motors.
BFT Deimos BT A600 price in Oman
The price is 126.000 OMR for the kit above. We hold stock at our Al Khuwair shop, and we deliver to all eleven governorates. We quote installation separately, once we have seen the gate.
Send us five things:
- The gate leaf length
- An estimate of the gate weight
- Whether the infill is solid or barred
- How often the gate opens
- Whether you need it working in a power cut
Then we will confirm the model and the rack before you pay.
- Shop: Shop No 176, Way Street No 57, Block No 17/2, Al Khuwair, Muscat, Oman
- Phone and WhatsApp: +968 78109286
- Email: contact@doorsauto.com
- Or use the contact page
BFT Deimos BT A600 FAQ
Should I buy the Deimos BT A600 or the Deimos AC A600?
The BT, in almost every case. It runs at 12 m/min against 9, and it has slowdown where the AC has none. It also carries the full intensive duty rating, and it uses D Track instead of a friction clutch. Finally, it draws 70 W against 400 W, takes backup batteries, and costs less.
Can the gate work during a power cut?
Yes, if you add backup batteries. The 24V motor supports them, while the AC models never do. Without batteries you use the personal release key and push the gate by hand.
What does D Track do?
It reads the torque the motor produces, then reacts when the gate meets resistance. Because it adapts, it does not simply slip or cut out. It protects the gate and the mechanism, so always wire the photocells to protect people.
How long a gate leaf will it handle?
BFT publishes no length limit against this product code, though other Deimos BT documentation gives 6 m. Measure your leaf and send us the figure, because leaf length often binds before weight does.
Is four metres of rack enough?
Only for a leaf of about four metres or shorter, because rack runs the full length of the leaf rather than the opening width. Send us your leaf length, and we will price the right quantity in nylon or steel.
What is the difference between this and the Deimos Ultra BT A600?
Both run on 24V and both reach 600 kg. However, the Ultra adds magnetic limit switches, which do not drift out of adjustment over years. It also adds U Link integration.
BFT DEIMOS BT A 600 KG Specifications automatic gate motor:
- Type: Sliding Gate Motor
- Capacity: Suitable for gates up to 600 KG
- Features: Advanced safety systems, energy-efficient operation, user-friendly controls
- Applications: Ideal for heavy residential sliding gates
- Durability: Built for long-lasting performance in various environments
Additional information
| Weight | 600 kg |
|---|---|
| Max gate weight | 600 kg |
| Motor voltage | 24V |
| Board supply | 230V |
| Power consumption | 70 W |
| Leaf speed | 12 m/min |
| Pinion module | Module 4 |











Reviews
There are no reviews yet.